Item6801 – John Deere 648G III Log Skidder

 

John Deere 648G III Log Skidder
2004
Here is a list of repairs done in our shop:
Replaced engine oil drain valve and serviced engine oil & filter as well as fuel filters.
Resealed & repaired leaking hydraulic cylinders.

Replaced cylinder pins and bushings as necessary.
Replaced all leaking hydraulic hoses.
Perform diagnostics test on service codes.
Replaced sensors as necessary including a new ECU.
Repaired dozer blade weldments and replaced dozer pin & bushings.
R & R front axle and replaced seals, sleeves and bushings for the oscillating dual pivot.
Separate machine and replace seals, bushings, sleeves, pins and locking collar for the center articulation joint.
Put machine back together.  Replaced bumper stop pads.
Resealed steering motor and replaced steering motor mounts.
Add antifreeze to adjust freeze protection to negative 34 degrees F.
Reseal brake valve.
Refill hydraulic tank with oil and replaced the hydraulic oil return filter.
Recover seat.
Check a/c and heater for operation.
Replace receiver dryer, compressor, condenser, suction & discharge hose.
Charge system and check for operation.
Replaced main engine belt.
Replaced exhaust system from turbo out.
Performed a case drain test on the hydraulic pump. Pump passed inspection.

Good 30.5 x 32 tires
$72,500.00
Item6801-2

Item6801aItem6801b